In addition to all the above you could actually use an alternative to manual config on each PC.
If you want a PC to always have the same IP then the router probably has an option to set an IP address statically for the PC. That way the PC can continue obtaining automatically but you can assign a particular address to a particular device. Netgear and thomson routers do this and any good router should.
It also means that if the DNS servers change you only have to update them on the router (and if it is set to pick them up automatically from the ISP you wouldn't even need to change there).
I use this method on my network and most PCs are statically assigned via the router without messing about with the config on each machine.



Pages in this thread:
Print Thread
ian72