Technical Discussion
  >> Technical Issues


Register (or login) on our website and you will not see this ad.


These posts have been archived and can no longer be replied to or modified.
Pages in this thread: 1 | [2] | (show all)   Print Thread
Standard User deleted
(deleted) Fri 01-May-09 22:18:36
Print Post

Re: Maximum value for money?


[re: deleted] [link to this post]
 
If you have Sky TV then Sky LLU may be the best value.

Otherwise choose between Be or O2 LLU, whichever is best for your circumstances. If you search for user MKD he does a comparison document between Be and O2.
Standard User deleted
(deleted) Fri 01-May-09 22:45:33
Print Post

Re: Maximum value for money?


[re: deleted] [link to this post]
 
Thanks I just read that MKD document, very good info there!

Im swaying towards Be, heard good things about them and they seem to be involved in online gaming, something that I like to do. Their best package is also still cheaper than what Im paying now, incredible seeing as they think I can probably get 13meg! Nildram estimated 9meg, in reality its probably going to be 6meg, but this is still great!

But we'll see, I'll contact Nildram and start the process.
Standard User deleted
(deleted) Fri 01-May-09 22:56:22
Print Post

Re: Maximum value for money?


[re: deleted] [link to this post]
 
Good luck. smile


Register (or login) on our website and you will not see this ad.

Standard User kwikbreaks
(eat-sleep-adslguide) Sat 02-May-09 08:08:52
Print Post

Re: Maximum value for money?


[re: deleted] [link to this post]
 
Good luck with Be. They are the same network as O2. I didn't mention them in my original post as you were asking for best VFM and right now that is undoubtedly O2 as there is £70 cashback through Quidco and 3 months free. If you use an O2 mobile (contract or PAYG) there is a further £5 per month off.

I took that deal in January and my BB outlay is just over £18 for the entire year. I do have a monthly sim which costs £120pa but spending £40pa on PAYG would have brought the same discount.

I didn't mention Sky because I detest Murdoch.



If you can't fix it with a hammer you've got an electrical problem.
Standard User deleted
(deleted) Sun 03-May-09 17:34:20
Print Post

Re: Maximum value for money?


[re: kwikbreaks] [link to this post]
 
A small update here:

I have asked Nildram to turn off interleaving to check the stability of the line.

They have just turned it off but they also have upped my sync rate from 3072 / 288 to 6144 / 896 - a nice speed increase with FASTPATH as well.

I hope there are no problems with line stability though, only way for me to find out is to play some online gaming and see if the sync drops.

Here are my ADSL stats now:
Channel: FAST, Upstream rate = 896 Kbps, Downstream rate = 6144 Kbps
Link Power State: L0
Mode:			G.DMT
Channel:		Fast
Trellis:		ON
Line Status:		No Defect
Training Status:	Showtime
		Down		Up
SNR (dB):	9.3		12.0
Attn(dB):	42.0		22.5
Pwr(dBm):	19.8		12.5
Max(Kbps):	6176		1024
Rate (Kbps):	6144		896


Can anyone predict from these stats if I will get problems?

That SNR of 9.3 is a bit worrying, or is it still okay?
Standard User kwikbreaks
(eat-sleep-adslguide) Sun 03-May-09 17:55:05
Print Post

Re: Maximum value for money?


[re: deleted] [link to this post]
 
The high margin suggests it could go faster and should be pretty stable. With ADSL2+ it would be better still.



If you can't fix it with a hammer you've got an electrical problem.
Standard User b4dger
(fountain of knowledge) Sun 03-May-09 17:56:01
Print Post

Re: Maximum value for money?


[re: deleted] [link to this post]
 
If you are getting 6144 / 896 with that target SNR then it shows you have a good line - I would swap with you!!! wink

If it runs clean for a few weeks then you might get a 6db target with a higher sync - but from where I'm sitting it all looks good...

-------------------------------------------
Freeola[EntaNet]
Rural line - Att:51 Target SNR:6 SYNC:5500 BRAS:4500

Hmmm...
SNR: Netgear DG834>2Wire 2700>Thomson ST585v6 My Router Experience
Pages in this thread: 1 | [2] | (show all)   Print Thread

Jump to