xte-2005 wiring

Soon to install an xte-2005 faceplate over the master socket. Im running cat5 behind the walls and would like to connect a length of cat5 to the rear of the faceplate and terminate the other end in a patch panel, then connect the routers dsl port to the panel with a rj11-rj45 cable.

Q) What two pins on the xte-2005 do i use to acheive this?

Q) Im running 8Mbs with UKO the now (current speedtest), looking to get 24Mbs in January - will the xte-2005 handle that or should I be looking at another filtered faceplate?

Any info/help appreciated thanks.

boaby

This might help you:
http://www.adslnation.co.uk/downloads/docs/XTE-2005_Guide.pdf

Damn didn't see that, cheers dude.

Any comments though on it's compatibility with adsl2+ ?

its a low pass filter so the extra frequencies of ADSL2+ in general are blocked just like the lower frequencies of G.dmt ADSL - I see no issues.