Technical Discussion
  >> Technical Issues


Register (or login) on our website and you will not see this ad.


These posts have been archived and can no longer be replied to or modified.
Pages in this thread: 1 | 2 | [3] | (show all)   Print Thread
Standard User Zarjaz
(experienced) Thu 12-Apr-07 21:35:46
Print Post

Re: High Attenuation, Low Noise Margin - Help!


[re: ajdthomson] [link to this post]
 
Is there a high amount of errors showing in the logs ? In theory, with a Max service it should adjust itself to compensate and try and make it's target snr (usually 6db).

Standard User yarwell
(sensei) Thu 12-Apr-07 21:43:53
Print Post

Re: High Attenuation, Low Noise Margin - Help!


[re: ajdthomson] [link to this post]
 
the crawling p2p sounds like Eclipse throttling

Phil

666 kbytes/s with Demon

MaxDSL diagnostics
Standard User ajdthomson
(newbie) Thu 12-Apr-07 21:44:10
Print Post

Re: High Attenuation, Low Noise Margin - Help!


[re: Zarjaz] [link to this post]
 
Nothing in logs but netgear router doesn't seem particularly strong there... I am just seeing a constand 2db and very poor service.

So does this sound like a problem at the exchange?


Register (or login) on our website and you will not see this ad.

Standard User yarwell
(sensei) Thu 12-Apr-07 21:46:01
Print Post

Re: High Attenuation, Low Noise Margin - Help!


[re: ajdthomson] [link to this post]
 
if you reboot it and its still at 2 dB something is odd. Netgears are famous for drifting SNR results, if the errors aren't piling up on the counters I wouldn't worry about the margin. What flavour of Eclipse are you on ?

Phil

666 kbytes/s with Demon

MaxDSL diagnostics
Standard User ajdthomson
(newbie) Thu 12-Apr-07 21:49:10
Print Post

Re: High Attenuation, Low Noise Margin - Help!


[re: yarwell] [link to this post]
 
Rebooted router lots of times... mainly a constant 2db, occasionally 3, occasionallly 1.

I am on Eclipse 8mb evolution option 3 (http://www.eclipse.net.uk/index.cfm?id=fixedcomparison_res)
Standard User ajdthomson
(newbie) Thu 12-Apr-07 21:53:32
Print Post

Re: High Attenuation, Low Noise Margin - Help!


[re: yarwell] [link to this post]
 
Yep - could well be p2p throttling... which is fine but I am convinced there is still a problem:

1 - they are clearly not throttling p2p uplonk which can max out (but obviously I have capped it at a sensible amount) out yet downlink is about 2kb/s... never used to be like this

2 - getting the website problems and general poor experience. Also forgot to mention that podcasts never complete... I have to use downthemall on firefox which is capable of restarting.
Pages in this thread: 1 | 2 | [3] | (show all)   Print Thread

Jump to