|
|
|
Hi there
Just need some advice on how 2 cure a problem i got.
I just had a new extension added to my phone line and i think that this is the problem yet the ex BT engineer who fitted the line says it not.
When a phone call is made or recived my broadband seem to disconect for a breif moment when i plug it into the incoming test socket then there is no problem.
Is it possible that this guy has wired up the extension wrong.
ok here is wot i have got from the MAIN incoming box i have a wire that conects to the master socket, 2 wires connect to A & B part.
Wire 1 is a solid white/ with blue conected to A
wire 1 is a solid blue/ with white conected to B
The extension wire is
orange conected to 3
Blue conected to 2
Green Conected to 5
when it reaches the socket it is conected as
Green conected to A
Blue conected to B
Now to me if everything works fine in the test socket the the problem exist with the extension and not teh router....is this right???
any help would be gratefull recieved
thx again
|
|
|
Disconnect the orange on pin 3 and see if that helps - this is known as disconnecting the ring wire
Ring wire creates imbalance/injects noise onto ADSL side.
|
|
The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
|
|
|
Have you got filters where you need them? See http://www.dslzoneuk.net/socket.php?type=html
|
|
Register (or login) on our website and you will not see this ad.
|
|
|
|
filters on all extensions
will try taking out the orange wire 2 mora when i get back from work..thx
|
|
|
|
ok still no joy i have disconected the orange wire and broadband still disconects when phone is in use.
|
|
|
|
Try removing kit to see if you can identify a failure cause - perhaps a failed filter.
|
|
|
|
ok got new filters on each extension
took the orange wire out from the main socket and extension
yet the problem is still present
any other ideas guys
|
|
|
If you can make and receive calls using a single filter and the ADSL modem and a phone when using the test socket, then it suggests the wiring is not up to the job in the home
|
|
The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
|
|
|
|
ok do u think that the lenght of the line could be the issue.....it is a massive 50m long from the master socket.
is there any way i can reduce the noise from the line...
thx again guys
|
|
|
Hi there
Just need some advice on how 2 cure a problem i got.
I just had a new extension added to my phone line and i think that this is the problem yet the ex BT engineer who fitted the line says it not.
When a phone call is made or recived my broadband seem to disconect for a breif moment when i plug it into the incoming test socket then there is no problem.
Is it possible that this guy has wired up the extension wrong.
ok here is wot i have got from the MAIN incoming box i have a wire that conects to the master socket, 2 wires connect to A & B part.
Wire 1 is a solid white/ with blue conected to A
wire 1 is a solid blue/ with white conected to B
The extension wire is
orange conected to 3
Blue conected to 2
Green Conected to 5
when it reaches the socket it is conected as
Green conected to A
Blue conected to B
Now to me if everything works fine in the test socket the the problem exist with the extension and not teh router....is this right???
any help would be gratefull recieved
thx again
2 and 5 are the active pair. You can use Blue + Orange or Brown + Green for a twisted pair. You are using cores from 2 different pairs - if I read the spec for 2 pair CW1308 cable correctly. Perhaps a BT guy would comment.
|