The problem I've been experiencing has been going on for perhaps 2 and a half years now in one way or the other. I'm experiencing connection loss of around 30 seconds or so at random intervals - sometimes it happens once every few days, other times it seems to happen once every few hours. When this happens, applications like Ventrilo completely lag out and are forced to reconnect roughly 20-30 seconds later and P2P speeds fall to absolutely nothing. On my current router ( a Be Box - TG585v7) I have noticed that the 'internet' light on the top of the router goes out completely during the dropouts and the 'broadband' light flickers on and off. Unfortunately, considering this phenomenon is so unpredictable and doesn't last for very long when it does happen I have not been able to check line stats or anything of the like during one of the dropouts.
My linestats at the minute are as follows :
DSL Connection
Link Information
Uptime: 0 days, 0:32:27
DSL Type: G.992.5 annex A
Bandwidth (Up/Down) [kbps/kbps]: 1,278 / 7,053
Data Transferred (Sent/Received) [kB/kB]: 0.00 / 0.00
Output Power (Up/Down) [dBm]: 12.0 / 19.0
Line Attenuation (Up/Down) [dB]: 21.0 / 38.0
SN Margin (Up/Down) [dB]: 6.5 / 6.5
Vendor ID (Local/Remote): TMMB / BDCM
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 10 / 0
FEC Errors (Up/Down): 2 / 3,205
CRC Errors (Up/Down): 2 / 2
HEC Errors (Up/Down): 66,655 / 1
I'm very much a layman, so I'm sorry if there's something glaringly obvious in the above figures that I'm missing here, but I've done absolutely everything I can possibly think of to fix the issue : I replaced the filters on the line, I changed routers ( happens on both the current one and my older Belkin F5D7633-4), it has been happening when I was with BT and is also happening since I've changed Isp to Be, I totally removed the ethernet drivers my system is using and replaced the ethernet adapter. I really can't think of what else the problem could be other than either bad wiring in the house or a line fault ?
In case it is of any use - there are two phone sockets in the house - the Master and another one upstairs which I believe was installed by a BT engineer quite a while ago. I've tried a huge amount of variation with how the connection is set up to see if the problem is related to these. Currently the master socket is filtered & has a cable running upstairs to the router which is connected directly to the computer & the 2nd socket in the house has nothing plugged into it at all ( i.e. not even a phone). In the past though I have also tried running a standard cable ( i.e. one the shorter one that came with the router) from the router into a filtered 2nd socket (which is in this room) but the same thing keeps occurring regardless.
Short of phoning BT and asking them to come and look at the line I don't know what else I can try that isn't just a total stab in the dark. I'd really appreciate any suggestions or advice with this issue as it is beginning to be more than just annoying. Thanks.



Print Thread
Bleh175