|
|
|
Hi
I have had an ongoing problem with BT for some time now relating to slow speeds and my Homehub 2 router resetting itself upon receiving a call.
BT say there is nothing wrong with the line or the router, so what could it be?
Here are my line stats
FROM HOMEHUB 2
ADSL line status
Connection Information
Line state Connected
Connection time 0 days, 21:31:17
Downstream 2,816 Kbps
Upstream 448 Kbps
ADSL Settings
VPI/VCI 0/38
Type PPPoA
Modulation G.992.1 Annex A
Latency type Interleaved
Noise margin (Down/Up) 7.0 dB / 15.0 dB
Line attenuation (Down/Up) 59.3 dB / 31.5 dB
Output power (Down/Up) 4.2 dBm / 1.4 dBm
Loss of Framing (Local/Remote) 0 / 0
Loss of Signal (Local/Remote) 0 / 0
Loss of Power (Local/Remote) 0 / 0
FEC Errors (Down/Up) 37075 / 415
CRC Errors (Down/Up) 36297 / 300
HEC Errors (Down/Up) 201579 / 213
Error Seconds (Local/Remote) 2030 / 356
BT SPEEDTESTER RESULT
Test1 comprises of two tests
1. Best Effort Test: -provides background information.
Download Speed
1475 Kbps
0 Kbps 2000 Kbps
Max Achievable Speed
Download speedachieved during the test was - 1475 Kbps
For your connection, the acceptable range of speedsis 800-2000 Kbps.
Additional Information:
Your DSL Connection Rate :2816 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 2000 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 15.01:25.81:59.24 (SBE:NBE:PBE)
These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
The results of this test will vary depending on the way your ISP has decided to use these traffic classes.
2. Upstream Test: -provides background information.
Upload Speed
364 Kbps
0 Kbps 448 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 364 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 448 Kbps
|
|
|
HH2 reseting as in rebooting? Or reseting as in the ADSL drops and then comes back after a few seconds?
First one should not happen, 2nd suggestions possibly an issue with filtering/wiring in house or elsewhere.
|
|
The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
|
|
|
|
Hi
HH2 is rebooting.
Thanks
|
|
Register (or login) on our website and you will not see this ad.
|
|
|
As in you are unable to access the Home Hubs built in web configuration pages?
In which case the hub is faulty. A modem should not drop its LAN side connections due to the ADSL resyncing
|
|
The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
|
|
|
As in you are unable to access the Home Hubs built in web configuration pages?
Sorry I do not understand what you mean.
When we receive a phone call the HH2 powers down and reboots.
Thanks
|
|
|
When we receive a phone call the HH2 powers down and reboots.
it's broken then. Are your phones plugged into the HH2 ?
Phil
MaxDSL - goes as fast as it can and doesn't read the line checker first.
MaxDSL diagnostics
Are your kids pirates ? Limewire, Bearshare, Kazaa, BitTorrent, eMule are all tools of the trade.
|
|
|
|
No standard phones are plugged into the HH2. We only use the hub phones of which we have 5.
|
|
|
5 DECT phones connected wirelessly to the hub ? I wonder if it can cope with that many 
Phil
MaxDSL - goes as fast as it can and doesn't read the line checker first.
MaxDSL diagnostics
Are your kids pirates ? Limewire, Bearshare, Kazaa, BitTorrent, eMule are all tools of the trade. |
|
|
|
never heard of this particular issue the hub powering down on incoming calls.
however i have seen them randomly rebooting for no reason which equals faulty
|
|
|
Output power (Down/Up) 4.2 dBm / 1.4 dBm
The HH is faulty
|
Print Thread
deleted
