I've avoided broadband Hari Kari and flashed my HG612 without any difficulty. However I have no idea how/where to access my line stats. Could someone please help me in this regard. Also do I need to have my PC attached to LAN2 as during the flash to access the information?

I have LAN 1 connected to the router WAN port as usual, and LAN 2 connected to a normal router LAN port. I have reverted the HG612 to 192.168.1.1 as my router is 192.168.1.254. Making sure that the allocatable DHCP range excludes both of course.

That lets you see the GUI via your browser, on 192.168.1.1. The full stats require telnet just as they did on ADSLx, so to get those you need your telnet client enabled in Internet Options.

Instructions, if the username and password are still admin :-

telnet 192.168.1.1
admin
admin
sh
xdslcmd info --stats

Note that is two hyphens.
Also useful is

xdslcmd info --pbParams

The upper case P matters.

Similar to --stats is --show but I haven't a clue what the difference is.

Edit - that way wired or wireless links to the router work.

Edited by RobertoS (Tue 23-Sep-14 16:49:39)

In reply to a post by RobertoS:

Similar to --stats is --show but I haven't a clue what the difference is.

As I remember the old adslctl the diff is --show doesn't show all those tables of stats over certain time periods at the bottom. Or it may be v.v.

Thanks .

Just checked and that does appear to be the case.