Technical Discussion
  >> Technical Issues


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | (show all)   Print Thread
Standard User Furby
(member) Tue 21-Nov-23 10:41:23
Print Post

Mains connection to Openreach pavement box


[link to this post]
 
Openreach have been carrying out the preparation work on our estate for FTTP implementation.

In the last couple of days contractors have used a mole plough to run a cable from the Openreach underground pavement box connecting it to the 250 volt mains cables buried in the roadway.
This has been done to all the pavement boxes on the estate.

What is this connection used for?

Is it just to charge back up batteries to be fitted in the pavement box, or if it is used to power equipment to be fitted in the box, will power cuts result in the digital voice being unavailable even if a back up battery is fitted in the house?

Just intrigued.

Furby
Standard User PCJM40
(member) Tue 21-Nov-23 15:00:08
Print Post

Re: Mains connection to Openreach pavement box


[re: Furby] [link to this post]
 
In reply to a post by Furby:
a cable from the Openreach underground pavement box connecting it to the 250 volt mains cables
Are you sure its a 250v mains cable? I would have thought it would be the last thing Openreach would want in their chambers as their FTTP network is normally passive.
Standard User Iniltous
(member) Tue 21-Nov-23 15:15:09
Print Post

Re: Mains connection to Openreach pavement box


[re: PCJM40] [link to this post]
 
If it’s FTTP and not FTTC , then it could be for a subtended headend that’s going in, but that would be in a cabinet not a footway chamber , they would need to pick up mains power from the somewhere nearby, in its own dedicated duct , but there should never be ‘mains’ in the OR normal underground duct network containing copper/fibre cables

Edited by Iniltous (Tue 21-Nov-23 15:17:19)


Register (or login) on our website and you will not see this ad.

Standard User PCJM40
(member) Tue 21-Nov-23 15:36:27
Print Post

Re: Mains connection to Openreach pavement box


[re: Iniltous] [link to this post]
 
In reply to a post by Iniltous:
If it’s FTTP and not FTTC , then it could be for a subtended headend that’s going in, but that would be in a cabinet not a footway chamber , they would need to pick up mains power from the somewhere nearby, in its own dedicated duct , but there should never be ‘mains’ in the OR normal underground duct network containing copper/fibre cables
The OP said a FTTP implementation with 250v power to every chamber on their estate, I said 250v would be the last thing Openreach would want in their chambers. no one said anything about a SHE or a cabinet so you could have just agreed with me rather than adding even more irrelevant stuff to the mix.
Standard User candlerb
(knowledge is power) Tue 21-Nov-23 16:26:48
Print Post

Re: Mains connection to Openreach pavement box


[re: Furby] [link to this post]
 
It's extremely unlikely to be power. Have you seen the cable itself?

If it's as thick as a sausage, it's probably a spine cable with 144 or more fibres. But it may well look similar to a power cable. Something closer in size to TV aerial cable will be from splitter node to connectorized block terminals.

Or they could be pulling subducts, which are basically just plastic pipes that fibre cables are blown through later.

Alternatively, if they really are digging up for power cables then I'd guess it's to do with street lighting - but that won't go via Openreach footway boxes, which will normally be labelled as "BT", "GPO" or "Openreach"
Standard User witchunt
(fountain of knowledge) Tue 21-Nov-23 16:43:23
Print Post

Re: Mains connection to Openreach pavement box


[re: Furby] [link to this post]
 
No chance it's mains power cable.
Standard User Furby
(member) Tue 21-Nov-23 16:58:58
Print Post

Re: Mains connection to Openreach pavement box


[re: PCJM40] [link to this post]
 
No it is definitely mains cable.

It is from within the roadway (There is no other cables in the road other than the mains supply).

They have added another small box in the footpath next to the original footway box, and used a mole plough from these boxes to the path of the mains cables in the road.

They have reinstated the road leaving about a foot square reinstatement.

Telephone cables are under the footpath on our estate and don't cross the road near where they have used the mole plough.

This is at every telephone pavement box to within the road where they have dug it up(about 3 feet from the kerb.

The road has been marked in red to show where the mains cables are.

The company carrying out the work is called Wingnut utilities Ltd

The fibre to the pole were installed 12 months ago and have no yet been brought into service.
The FTTC box is about 600 yards away and the telephone exchange is about 1 mile away.

Hope this helps to find out what is happening.


Furby
Standard User PCJM40
(member) Tue 21-Nov-23 17:10:05
Print Post

Re: Mains connection to Openreach pavement box


[re: Furby] [link to this post]
 
Could it be this is for an altnet and not Openreach if there is another smaller chamber next too the openreach one?
Standard User witchunt
(fountain of knowledge) Tue 21-Nov-23 17:34:17
Print Post

Re: Mains connection to Openreach pavement box


[re: Furby] [link to this post]
 
There is definitely no mains power in openreach footway box's . There is no need. Unless some utility has done it without permission for there own reasons. If that is what has happened they will have to remove it.

Edited by witchunt (Tue 21-Nov-23 17:35:50)

Standard User ionic
(fountain of knowledge) Tue 21-Nov-23 20:42:36
Print Post

Re: Mains connection to Openreach pavement box


[re: Furby] [link to this post]
 
Some pictures would really help shed some light if you're able to provide them
Pages in this thread: 1 | 2 | (show all)   Print Thread

Jump to