Had a play tonight, not solved the issue yet though.

I had the free X-Lite softphone installed but ditched it and put the 3CX one on instead.It worked, as before, on my Virgin media connection. This time I get to dial out, but the call terminates just after dialling.

I also have the situation of wanting to stream audio when I do an 'outside broadcast' for the radio station - I know how tio set it all up, again it works on the Virgin connection - but no go at all on the EE Kite

I've left the laptop set up so I can give this another go and perhaps call EE. Not sure what they can do for me though. I've also dropped it on to the EE forum's, see if anyone there can help.

Thanks, do you have 3CX connected direct to Sipgate or it it going via an exchange?

OK, 3CX is direct. I've not been able to play much as I suffer with bad lungs and can't be in the cold long. Playing with the laptop is on the dining room table, away from my gas fire and heated blanket.

I've had the heating on as we've had visitors and took a hit more time to play. The Sipgate website tells me to disable SIP ALG, which other sites told me was there specifically to enable SIP trunks. So I've tried it with that turned off. Still not much joy, so I created virtual server ports on 5060 and 5061 - yay! I got the 10000 test line to work and SIP-SIP works, using ID numbers. This is on a EE Kite device,

BUT, calling the assigned 01 number from another phone just cuts off. I've yet to get full calling running. I'll keep on at it though. Now I've got this far I'll probably contact support at Sipgate.

I should really have copied down what settings I'm using - they differ greatly from the 3CX on Android I've been using before. I don't have many issues with SIP, it's just this mobile broadband that's been bugging me. I have 2 Camrivox Flextor 151 ATA's for physical phones at home. No problem with those to normal DECT phones.

Yay, after a long time messing about with settings I've finally got my (multiple!) SIP's connected on my mobile.
I have a few long-standing Sipgate accounts on different exchanges, plus a paid account with A&A. 9 in all
I recently upgraded my mobile, now on EE instead of Orange and have a Samsung Galaxy Ace 4. 3CX wouldn't work for me so I looked around and found an app called CSipSimple.
There are a few background settings to fiddle with, such as allowing incoming calls and roaming. But, something is working at last as I can call out and get calls in on all of my lines. The interface is a lot simpler as well.
I have a SIP connected to an ATA at home on the A&A line as I use that for personal calls, thus avoiding all the PPI claims companies. The good news is that that line rings on the home phone and the mobile at the same time, which was a bonus.
It's taken some time but please to say it's now resolved.

I have CSipSimple on a Galaxcy Ace 2.

When I start it without WiFi I get a little message:

"Selected network route not allowed with current settings you have setup"

This happens before I try to register any of my VOIP accounts, and with both Vodafone contract and Three PAYG Sims. The accounts only work if I have WiFi enabled. I also had to make a change to my Technicolor 582n so that it would pass port 5060.

I just realised, I didn't solve my original problem after all. I have these working on my phone, wifi and main network, but not the mobile broadband still. I'll have to get the laptop out again

In reply to a post by Michael_Chare:

I have CSipSimple on a Galaxcy Ace 2.

When I start it without WiFi I get a little message:

"Selected network route not allowed with current settings you have setup"

This happens before I try to register any of my VOIP accounts, and with both Vodafone contract and Three PAYG Sims. The accounts only work if I have WiFi enabled. I also had to make a change to my Technicolor 582n so that it would pass port 5060.

There's a setting in csipsimple in the Menu/Settings/Network where you can specify for incoming and outging calls whether you use WiFi/3G/GPRS et al. I have mine set to WiFi only for incomng & outgoing (so that I only make VOIP calls over WiFi and not over 3G et al so it doesn't use data allowance) and I get the above message each time I load csipsimple (and use it as reminder to enable WiFi to make/receive the VOIP call)

Allan

Thank you very much. I kept looking for the settings but failed to find them.

Now I have found them, it looks like I can use Sipgate to make and receive calls using a Vodafone contract Sim. The receiving phone rang when I tried a call. Voipfone and DiscountVoip have also registered. My A&A account fails to register, there maybe something I can change.

Account Migration Issue

My 'Basic' account was 'migrated' mid-May with no notice. I could then no longer log in on the 'old' account. Despite clearing cookies, the browser (and the attic...) I could not get access to the 'new' account and could not top up the account which was nearing zero.

I think 'support' was a bit stretched at Sipgate and no working answer was forthcoming. In desperation I rang the 'team' support number and it was instantly sorted.

In case anyone else has this problem, it appears that the 'hiccup' was caused by my ticking the 'remember me for 14 days' option on the 'old' site.

Edited by mikejp (Tue 02-Jun-15 15:21:50)

Latrsrt UPDATE:

Sipgate confirm that the migratioin is causing problems for some, and they need to request a password change. Logging in with the new SHOULD correct the problem.

Secondly, they confirm that SipgateFFX will NOT work with the new system but they say they are working on that.

Personally I find the new format less intuitive than the old, but I guess that's progress.................!

Edited by mikejp (Fri 05-Jun-15 14:28:45)