It is still rebooting. A reboot will clear out the Event Log which is why you will only see the one entry for Internet Connection. Have you checked that you actually have the new version 8 on the router ?

Any chance you could share the file? E.g., upload to online storage (OneDrive, Google Drive, Dropbox etc.) and either make it public or dm me with a link?

Thanks

In reply to a post by NewMoon:

Any chance you could share the file? E.g., upload to online storage (OneDrive, Google Drive, Dropbox etc.) and either make it public or dm me with a link?

Thanks

Sent.

My pleasure, glad I could be of help.

This has given me a bit of hope. Any chance you could share the file with me too? I've been dreading a rollback and having to reconfigure my entire network 😱

Thanks Yes I have the new version and for good measure Zen reloaded it as well.

Anyway after multiple attempts at ‘fixes’ from their end including several today they have decided none of them work and a new router is on its way to me. Just hope that sorts it!

I'd also like a link please. Thank you.

Hi, I'm new to this forum, so please forgive me if I don't follow usual procedures.

I had the same issue with my Fritzbox 7530 (1st version) constantly rebooting directly after I updated the OS from v7.59 to v8.00 a week or so ago. I soon gave up with Zen tech. support when it became clear to me that they didn't have a clue.

I had been reading the messages in this forum and I began to suspect that the issue is caused by a faulty piece of firmware which controls the DSL section of the router.
(I came to this conclusion because the issues only appeared to be affecting Zen users in this country.
The UK are one of the last to switch away from DSL, so that would fit in with European users not being affected by the rebooting issue.

To test this theory I bought a cheap TP-Link TD-W9970 VDSL router from Amazon (£23.49) and set it up in Modem Only mode (Bridge mode) connecting it to the Openreach DSL line instead of the Fritzbox. Then I setup the Fritzbox in Router Only mode and connected LAN1 on the TP-Link router to LAN1 on the fritzbox with an ethernet cable. It's been working perfectly ever since (3 days now).
See these 2 videos I found on Youtube for how to do it (It is really simple):
https://www.youtube.com/watch?v=CbN1apeTbLI
https://www.youtube.com/watch?v=1l1KgEh4kHU
I'll probably just leave it like that until I switch to FTTP in the future (All I'll have to do then is connect the Fritzbox to the new Openreach FTTP modem)

I hope that helps someone

So many asking....not doing PM's anymore....

I'm contacting you again today because we can offer new options.

There is a new pre (lab) firmware OS 8 for your FRITZ!Box.

You can do the following:


Save the settings of the FRITZ!Box 7530:
Saving and restoring the FRITZ!Box settings
Download the pre (lab) firmware here:
https://clouddrive.avm.de/s/99tTgXHSTA4oTTz
Password: nJCq2sPrxU
Then install manually as described here:
Updating FRITZ!OS manually : https://en.avm.de/service/knowledge-base/dok/FRITZ-B...


We have addressed the restart problem in the firmware and hope that this firmware will resolve it. Therefore, we are very interested in your feedback from your setup.

Thank you in advance for your support.

Edited by jamsmv6 (Fri 08-Nov-24 07:38:18)

Here is a Google Drive download link in case AVM restrict access:

https://drive.usercontent.google.com/uc?id=1uKsQSKJx...