Todays update

He moved to another set of twisted wires and it was still the same, so he went to the other sid of the bundle and the below is the result.

Estimated line speed:
53Mb (Download speed could vary depending on line conditions. Estimates are the maximum speeds that your phone line can support. These speeds are dependent on the package you choose.) - Checked on 2013-05-02 20:08:42
Current line speed:
51.6 Mb



FAQ

Results Image not loaded



1. Best Effort Test: -provides background information.

Download Speed
49.43 Mbps

0 Mbps 50.08 Mbps
Max Achievable Speed

Download speedachieved during the test was - 49.43 Mbps
For your connection, the acceptable range of speedsis 12 Mbps-50.08 Mbps .
Additional Information:
IP Profile for your line is - 50.08 Mbps

2. Upstream Test: -provides background information.

Upload Speed
6.56 Mbps

0 Mbps 20 Mbps
Max Achievable Speed

Upload speed achieved during the test was - 6.56Mbps
Additional Information:
Upstream Rate IP profile on your line is - 20 Mbps

Not complaiming lol but how does this happen?

1. Best Effort Test: -provides background information.

Download Speed
50.8 Mbps

0 Mbps 50.08 Mbps
Max Achievable Speed

It happens by editing out the extremely relevant intervening bits from the original post.

Only missed out the upload :/
Ddin't think it was important, will see if it does it again.

and it did it again lol



FAQ

Results Image not loaded



1. Best Effort Test: -provides background information.

Download Speed
52.1 Mbps

0 Mbps 50.08 Mbps
Max Achievable Speed

Download speedachieved during the test was - 52.1 Mbps
For your connection, the acceptable range of speedsis 12 Mbps-50.08 Mbps .
Additional Information:
IP Profile for your line is - 50.08 Mbps

2. Upstream Test: -provides background information.

Upload Speed
6.95 Mbps

0 Mbps 20 Mbps
Max Achievable Speed

Upload speed achieved during the test was - 6.95Mbps
Additional Information:
Upstream Rate IP profile on your line is - 20 Mbps

and the plusnet bit


Estimated line speed:
53Mb (Download speed could vary depending on line conditions. Estimates are the maximum speeds that your phone line can support. These speeds are dependent on the package you choose.) - Checked on 2013-05-02 20:08:42
Current line speed:
51.6 Mb

Ah, now I see .

Are you using Kaspersky or Avira?

No, non of those

What firewall are you using then? As you can trust the BT Wholesale site, it might be worth turning on Windows firewall, (most IS suites turn it off), then disable your IS while you do the test. Then put it back on and disable the Windows firewall.

They can cause strange buffering, which could cause that. There is no possible way it comes out of the DSLAM faster than the IP Profile, and all examples such as yours have been traced to IS(f/w) buffering.

I use mcafee just turned it off and got this


1. Best Effort Test: -provides background information.

Download Speed
50.54 Mbps

0 Mbps 50.08 Mbps
Max Achievable Speed

Download speedachieved during the test was - 50.54 Mbps
For your connection, the acceptable range of speedsis 12 Mbps-50.08 Mbps .
Additional Information:
IP Profile for your line is - 50.08 Mbps

2. Upstream Test: -provides background information.

Upload Speed
7.11 Mbps

0 Mbps 20 Mbps
Max Achievable Speed

Upload speed achieved during the test was - 7.11Mbps
Additional Information:
Upstream Rate IP profile on your line is - 20 Mbps