Well, it had an episode this morning and after a reboot checked and the stats had changed.....

Straight away pinged BBC, noticed an additional 8ms on the pings... pretty obvious whats happened... so disconnected and dug out the HG612 from my old house and now all connected...

Stats checked and yes an odd level of Interleaving and G.INP not enabled... I didn't think DLM was assigning Interleaved profiles anymore...

I've lost around 500Kbps so not going to cry about that but as a gamer latency pretty important but we'll see I suppose...

I wonder if BT can request my profile reset after this nonsense from there hub.

Is it an HH5A or 5B? I can't see where you say.

Please could you post the stats from xdslcmd info --show ?

In reply to a post by RobertoS:

Is it an HH5A or 5B? I can't see where you say.

Please could you post the stats from xdslcmd info --show ?

Type B....

Will do once I've got it connected to LAN

Just chatting with "Shweta" from BT

As requested heres the Telnet stats...

# xdslcmd info --show
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 27302 Kbps, Downstream rate = 91644 Kbps
Bearer: 0, Upstream rate = 19999 Kbps, Downstream rate = 79442 Kbps

Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 6.2 15.4
Attn(dB): 16.6 0.0
Pwr(dBm): 13.4 7.0
VDSL2 framing
Bearer 0
MSGc: 14 26
B: 51 237
M: 1 1
T: 64 42
R: 12 16
S: 0.0208 0.3781
L: 24576 5374
D: 1555 1
I: 64 127
N: 64 254
Counters
Bearer 0
OHF: 5725627 1930840
OHFErr: 0 0
RS: 1465571088 3750067
RSCorr: 611263 0
RSUnCorr: 0 0

Bearer 0
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 1170691028 0
Data Cells: 7055879 0
Drop Cells: 0
Bit Errors: 0 0

ES: 0 0
SES: 0 0
UAS: 28 28
AS: 7665

Bearer 0
INP: 3.00 0.00
INPRein: 0.00 0.00
delay: 8 0
PER: 1.33 3.98
OR: 119.53 64.22
AgR: 79561.21 20063.54

Bitswap: 3174/3174 0/0

PS: BT said hub not faulty

Edited by mlmclaren (Thu 11-Feb-16 13:15:54)

Assuming a Huawei cabinet then G.INP should cut in fairly soon then. What caused it to drop out, no idea sorry.

In reply to a post by RobertoS:

Assuming a Huawei cabinet then G.INP should cut in fairly soon then. What caused it to drop out, no idea sorry.

Aye, It's a Huawei 96/128 (The Wee One)

Home Hub keeps having fits and cutting out, unfortunately I couldn't say how many times it done it as until an hour ago I had no CQM going on due to the HH's port forwarding not working and another device occupying the DMZ..

"Sheet" said :

"I have refreshed your line... You will get a call tomorrow from BT Tech Experts tomorrow between 1 - 1:30pm"

"Here is your ref id....."

I hope that means a DLM/Line Profile reset...

In reply to a post by mlmclaren:

Hmm yeah I forgot to mention that its stopped connecting to DynDNS a couple of times for some reason... I think it is faulty then but I'm not bothering with another to find out....

Have you tried a 'hard reset'?

As in factory?

I think a DLM reset will cut out both interleaving and G.INP, until it decides if it needs either.

If it does find the error rate requires action I wouldn't be surprised if interleaving isn't the first step, then later replaced by G.INP. With lick, I'm wrong and if action is needed G.INP would be the first step.

It will be interesting to see what happens! Any chance you could run DSLStats (I think is the one) on the HG612. So we have a history, not snapshots taken by you perhaps missing something happening.

Well Fast Path is where I would be happy, however G.INP would be the next preferred step of error correct (if required)

Unfortunately no I won't be able to run DSLstats, I only have iMac's plugged in and no VM's setup on them yet...

Windows devices are laptops and not willing to run them flat out as thats the perfect way to shorten their already endangered lives.