The 6 was syncing at 52, the current at 54, so not that much difference.

Like I say, I haven't given up on it as I like the router (interface a bit slow maybe), one I have got myself something to put in the DMZ that will respond to pings, I will try it again Would like the speeds to be a bit closer to the sync though, rather than 6- 10 meg down (but still over 40, so shouldn't complain really).

I have just reconnected my HH6 and have a 3mb loss of sync straight away Not a huge amount, but a loss nonetheless.

If you are on ECI cab that is to be expected though surely? (although i dont know what cab you're on to be fair lol)

Nor me

In reply to a post by Discus:

Nor me

Try

[Check by Full Address]
http://www.dslchecker.bt.com/adsl/ADSLChecker.Addres...

[Check by Phone Number]
Same link as above but you will need to click on the Telephone Number Checker Link at the bottom of the page.

That will say what Exchange and Cabinet your connected to.

Paul

Sandy, cabinet 3, but nothing about cabinet type.

Eci

So that is enough to make the difference? I assume my Technicolor and Billion routers work better with this cabinet then?

In reply to a post by Discus:

Sandy, cabinet 3, but nothing about cabinet type.

Like BatBoy has said.

[Cabinet Information]
    Fibre Cabinet: Cabinet P3
      FTTC Status: FTTC Available from 20th June 2012
            Phase: Phase 07b 2011-2012
      FTTP Status: 
Properties Passed: 555
           Vendor: ECI

Hope that helps.

Paul

Well, its either our connection is that fubard up, BT has loads of issues or the Smart Hub is [censored].

It was fine for 3 days with no issues what so ever, then tonight we have lost connection over 7 times within the last 4 or so hours.

And now we have lost over 1Mbps of our 5.3Mbps ADSL2+ connection.

BT will defiantly be getting a phone call from me tomorrow.

Not very happy at all.

Paul