Forum Index | Search | Register (New User) | Login (Existing User) | Who's Online | FAQ | Main Site

User comments on ISPs
  >> BT Broadband Previous thread View all threads Next thread


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | [2] | (show all)   Print Thread
Standard User John_Gray
(member) Mon 16-Jan-17 14:22:59
Print Post

Re: Router stats for a VDSL2 line


[re: RobertoS] [link to this post] 		 
The Draytek Vigor 2860 includes its own modem code, so there is no need for a Draytek 130 modem.

I can't find any telnet commands starting xdsl... in the Draytek Command Line Reference manual V.1.12 (Updated May 2016)
Standard User RobertoS
(elder) Mon 16-Jan-17 14:36:09
Print Post

Re: Router stats for a VDSL2 line


[re: John_Gray] [link to this post] 		 
I cited the 130 because manufacturers tend to have the same telnet interface across all their kit smile. IIRC the SHOW one you gave also works with the 130, but no more use than the GUI.

Have you tried either of mine? If one works so will the other, it's only the time breakdown of error stats that differ. Neither will crash the thing smile.

Kindness isn't going to cure the world of all its awfulness but it's a good place to begin. Daisy Ridley.
My broadband basic info/help site - www.robertos.me.uk. Domains, site and mail hosting - Tsohost.
Connection - AAISP Home::1 80/20. Sync 54999/14466Kbps @ 600m. BQMs - IPv4 & IPv6
Standard User John_Gray
(member) Mon 16-Jan-17 17:56:00
Print Post

Re: Router stats for a VDSL2 line


[re: RobertoS] [link to this post] 		 
TELNET results

Account:admin
Password: *************

User login successful, expired time is "Unlimited".

> xdslctl info --stats
% Command missing, Valid commands are:
adsl vdsl bpa csm ddns dos
exit internet ip ip6 ipf log
ldap tacacsplus mngt msubnet object port
portmaptime ppa prn qos quit show
smb srv switch sys testmail fs
upnp usb vigbrg vlan vpn wan
wptl radius local_8021x wol user appqos
nand apm sfp ethoam ha swm

>


Register (or login) on our website and you will not see this ad.

Standard User RobertoS
(elder) Mon 16-Jan-17 22:33:48
Print Post

Re: Router stats for a VDSL2 line


[re: John_Gray] [link to this post] 		 
Ah well.

Kindness isn't going to cure the world of all its awfulness but it's a good place to begin. Daisy Ridley.
My broadband basic info/help site - www.robertos.me.uk. Domains, site and mail hosting - Tsohost.
Connection - AAISP Home::1 80/20. Sync 54999/14466Kbps @ 600m. BQMs - IPv4 & IPv6
Standard User MHC
(sensei) Tue 17-Jan-17 09:16:02
Print Post

Re: Router stats for a VDSL2 line


[re: John_Gray] [link to this post] 		 
Rather than using the XDSL command try using VDSL info or VDSL which the valid command list suggests.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

M H C


taurus excreta cerebrum vincit
Standard User deleted
(deleted) Tue 17-Jan-17 10:21:54
Print Post

Re: Router stats for a VDSL2 line


[re: John_Gray] [link to this post] 		 
To enlarge on Robertos's explanation, I can actually see inside the FTTC (when open - rarely) from my lounge window, about 10 Metres apart.

The FTTC in turn is about 40 Metres from the PCP; but the link cable is about 50 Metres long, as it first heads 5 M away from the PCP direction in a short section of new duct to enter the old main duct from the exchange to the PCP, hence the extra 10 M, before turning about to pass the FTTC onwards to the PCP.

The big conundrum is the 1967 phone wiring from the PCP to my house on a then green-field site, no obvious obstructions etc.

Yet the phone wire length from the PCP to my house is a known 250 Metres, as that wiring has been clearly identified many years back at a small junction block on the foundations of another house about 125 M away, when locating a fault in dial-up days.

Virtually all of it is underground, so no poles to help confirm the route.
Standard User John_Gray
(member) Wed 18-Jan-17 06:52:11
Print Post

Re: Router stats for a VDSL2 line


[re: MHC] [link to this post] 		 
@MHC: this is the result of VDSL STATUS, using the code and /code feature!
The router has been 'up' for just over 167 hours.

Text
1
23
45
67
89
1011
1213
1415
1617
1819
20
> vdsl status
  ---------------------- ATU-R Info (hw: annex A, f/w: annex A/B/C) -----------   Running Mode            :      17A       State                : SHOWTIME
   DS Actual Rate          : 79995000 bps   US Actual Rate       : 20000000 bps   DS Attainable Rate      :109864200 bps   US Attainable Rate   : 31270312 bps
   DS Path Mode            :        Fast    US Path Mode         :        Fast   DS Interleave Depth     :        1       US Interleave Depth  :        1
   NE Current Attenuation  :        5 dB    Cur SNR Margin       :       14  dB   DS actual PSD           :    -5.-3 dB    US actual PSD        :    -5.-3  dB
   NE CRC Count            :        0       FE CRC Count         :      221   NE ES Count             :        0       FE  ES Count         :      184
   Xdsl Reset Times        :        0       Xdsl Link  Times     :        1   ITU Version[0]          : b5004946       ITU Version[1]       : 544e0000
   VDSL Firmware Version   : 05-07-06-0D-01-07   [with Vectoring support]   Power Management Mode   : DSL_G997_PMS_L0
   Test Mode               : DISABLE  -------------------------------- ATU-C Info ---------------------------------
   Far Current Attenuation :        4 dB    Far SNR Margin       :       12  dB   CO ITU Version[0]       : b5004946       CO ITU Version[1]    : 544eb206
   DSLAM CHIPSET VENDOR    : < IFTN >

Edited by John_Gray (Wed 18-Jan-17 07:02:40)
Pages in this thread: 1 | [2] | (show all)   Print Thread

Previous thread View all threads Next thread
Jump to