Technical Discussion
  >> DSL Hardware Discussion


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | [2] | (show all)   Print Thread
Standard User jchamier
(knowledge is power) Thu 10-May-12 18:31:28
Print Post

Re: Use w8960n as fibre router?


[re: epyon] [link to this post]
 
In reply to a post by epyon:
While ive heard this many times i still take the draytek 2380 over it
Though since i cant reused this router any suggestions ?


I'd like to join Sky FTTC but the MER requirement is a big pain.

skyuser.co.uk has quite a long thread, where the BIllion has been shown to work with Sky's MER system on ADSL, but nobody has yet tried it on FTTC.

I'd like to use a Draytek too, but unfortunately it seems Sky's network doesn't work with PPPoE over the fibre modem, instead you have to use MPoA similar to BE/O2 and then the DHCP client (dhcpc) is modified to send an obscure request option with the sky userid/password inside.

Grr.

James - be* pro - 16.8 or 17.2mbps BQM
No FTTC cabinet yet (originally Mar 2011) THFB PCP 5 - hope for 21st May to 1 June !
Standard User Stanman_24
(knowledge is power) Thu 10-May-12 23:20:13
Print Post

Re: Use w8960n as fibre router?


[re: deleted] [link to this post]
 
there are also bringing out new firmware for sky fttc

http://www.billion.uk.com/forum/viewtopic.php?f=9&t=382

SOTV KRO BCFC smile
Standard User jchamier
(knowledge is power) Fri 11-May-12 07:30:27
Print Post

Re: Use w8960n as fibre router?


[re: Stanman_24] [link to this post]
 
In reply to a post by Stanman_24:
there are also bringing out new firmware for sky fttc


Good news, hopefully simple given they've made it work on ADSL/ADSL2+ smile

James - be* pro - 16.8 or 17.2mbps BQM
No FTTC cabinet yet (originally Mar 2011) THFB PCP 5 - hope for 21st May to 1 June !


Register (or login) on our website and you will not see this ad.

Standard User deleted
(deleted) Sat 23-Jun-12 21:08:30
Print Post

Re: Use w8960n as fibre router?


[re: jchamier] [link to this post]
 
Quote from the 8960N manual.....
"Default Gateway IP address should be specified since MER Interface is selected when you
select the Enable automatic Assigned Default Gateway check box."
Standard User epyon
(experienced) Tue 10-Jul-12 11:53:01
Print Post

Re: Use w8960n as fibre router?


[re: deleted] [link to this post]
 
Guess i'll give it a try tonight then.

Sky Fibre Unlimited
40/2
Pages in this thread: 1 | [2] | (show all)   Print Thread

Jump to