General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | [2] | 3 | (show all)   Print Thread
Standard User deleted
(deleted) Sat 31-May-14 13:09:45
Print Post

Re: BT Hub on Sky FTTC


[re: deleted] [link to this post]
 
Off subject here, but is there any demand for an unlocked huawei modem and HH4. No point in keeping them so was going to put them on gumtree to sell.. Any ideas what their worth second hand????
Standard User deleted
(deleted) Sat 31-May-14 13:29:06
Print Post

Re: BT Hub on Sky FTTC


[re: deleted] [link to this post]
 
Modem about 20-40 quid, HH4 about a tenner. Have a look on ebay.
Standard User deleted
(deleted) Sat 31-May-14 13:33:15
Print Post

Re: BT Hub on Sky FTTC


[re: deleted] [link to this post]
 
Thanks, will take a look...


Register (or login) on our website and you will not see this ad.

Standard User jchamier
(eat-sleep-adslguide) Sat 31-May-14 19:49:41
Print Post

Re: BT Hub on Sky FTTC


[re: deleted] [link to this post]
 
In reply to a post by Icaras:
I wouldn't expect your speed to remain higher than Infinity. You are connected to the same cabinet and it is the Openreach fibre cabinet that is negotiating the sync speed, nothing to do with Sky. It's probably just because it is a new provide and the DLM has been recalculated.

Slightly less overhead as Sky don't use PPPoE I believe.

James BT Infinity 2 19/09/2012 - Sold 42/6, Now 52/9, Sync @ 55 / 9.5 Mbps @ 470m approx
19/5/2014 - just ordered PlusNet Unlimited Fibre - awaiting activation date
15 years broadband (1999 ntl:cablemodem trialist) - Router: Asus RT-AC68U (merlin) - Modem: HG612 unlocked Typical BT speedtest
Standard User deleted
(deleted) Sun 01-Jun-14 11:03:20
Print Post

Re: BT Hub on Sky FTTC


[re: deleted] [link to this post]
 
In reply to a post by stubert:
Yes, I had an attainable of around 43meg with BT and synched at around 40meg when first installed about two and half years ago. This slowly crept down to 29meg over time due to DLM / crosstalk etc. with sky I now get 40meg again with a snr of 6.5db so I am expecting this to stay around this mark now... Line has been stable for 24hrs now, done a lot of gaming, downloaded maybe 40gig and still going good....
I have taught the wife that the router must not be unplugged at night to which I think was the initial cause of my speed drop!!!! wink


Do you understand what I'm saying though? Oh a fibre to the cabinet connection your sync speed is nothing to do with Sky!
Standard User deleted
(deleted) Sun 01-Jun-14 11:05:21
Print Post

Re: BT Hub on Sky FTTC


[re: jchamier] [link to this post]
 
That's not got anything to do with sync speed. The Openreach DSLAM in the cabinet negotiates the sync speed and they have full control over it. It only passes on to Sky's network at the headend. I'm not talking about throughput.
Standard User deleted
(deleted) Sun 01-Jun-14 11:40:23
Print Post

Re: BT Hub on Sky FTTC


[re: deleted] [link to this post]
 
The SR102 is a modem
Standard User deleted
(deleted) Sun 01-Jun-14 13:03:29
Print Post

Re: BT Hub on Sky FTTC


[re: deleted] [link to this post]
 
Of cause, just nice to see a faster speed now as it had dropped quite a bit over the last two years, probably due to the modem being turned off regularly resulting in DLM thinking the line was unstable...
Standard User deleted
(deleted) Sun 01-Jun-14 17:33:54
Print Post

Re: BT Hub on Sky FTTC


[re: deleted] [link to this post]
 
Nice one, as you say hopefully now it'll be kept on all the time now.

I do hope you don't see any of that dreaded Sky backhaul congestion that I'm seeing an awful lot of now on their fibre connections. Throughput of 20Mb with a sync speed of 40Mb, awful.
Standard User simon194
(experienced) Mon 02-Jun-14 01:12:15
Print Post

Re: BT Hub on Sky FTTC


[re: deleted] [link to this post]
 
That's nothing. At the height of the congestion problem with Sky in my area I was getting 10Kbps download with a 4s pings on a line syncing at 75 Mbps.
Pages in this thread: 1 | [2] | 3 | (show all)   Print Thread

Jump to