You disable it on the PC
http://www.informationweek.com/how-to-disable-ipv6-o...

What Stephen has told you is about as simple as it gets. I can only tell you for OSX sorry, but it's pretty similar.

Here is my ISP's guide to setting it up on Windows 7: http://support.zen.co.uk/kb/Knowledgebase/Fibre-Broa...

In reply to a post by StephenTodd:

On Windows that means that you must go into Network Settings and create a new network. Configure it for PPPoE, with a username of '[email protected]' (actually there are lots of others that will work), and any password you like.

Uh uh!

Just spotted what's wrong there. He's on Plusnet, not Infinity, so needs his normal Plusnet login username and password.

Thanks all. I manage to get openreach modem connected to windows 7 fibre PPPoE from openreach lan port 1 but I cannot access openreach modem http:192.168.1.1 to check connection stats. Do i need another cable from openreach lan port 2 to pc to get openreach connection stats?

Edited by adslmax (Tue 16-Sep-14 12:41:16)

I've just realised Stephen gave you the Infinity details. You need to use your Plusnet normal login(username@plusdsl.net) and password.

Yes, you need to plug an ethernet cable into LAN2 to access the stats

Edited by deleted (Tue 16-Sep-14 12:42:29)

Ah ok. I have to buy another ethernet cable.Lucky my pc had dual lan ports (one spare)

In reply to a post by RobertoS:

I've just realised Stephen gave you the Infinity details. You need to use your Plusnet normal login(username@plusdsl.net) and password.

Yes I always use plusnet login.

ou've got internet access now then?

You won't be able to get stats as before because you haven't got a port on your computer to connect to LAN2. You haven't got a LAN network.

What might work would be to set up a second computer with a fixed IP address of 192.168.1.50 and plug that into LAN2. You wouldn't get internet access on it, but you may be able to get the stats.

50p from comms-express