Hi,

Here they are
stats

thanks!

FTTC Range A (Clean)
64.4 45.3
18.5 11.9
FTTC Range B (Impacted)
54.8 30.6
18 7.9

I'm not sure about range from cab as I have been told conflicting info about which cab I'm even connected to! I'm sure I read on a forum somewhere that someone can dig it out!

thanks!

I don't think you've put them in "Public".

The easiest way to post stats is from real telnet. You can just copy and paste from the output.

You need the telnet client enabled in your internet options. Then open a CLI (Command Line Window):-

telnet 192.1.6.1.1
admin
admin
sh
xdslcmd info --show

and for the pbParams, the same but with the last line replaced by:-

xdslcmd info --pbParams

In reply to a post by MHC:

Are you SURE that you have not been put on a 40Mbps downstream profile by mistake? I know 40/20 does not exist, however an error could have happened.

It does on Plusnet, by providing 80/20 and capping the 80 internally.

If the OP is on Plusnet, (even if from a few years back), then that cap may have been wrongly applied.

There is also the possibility, (not having looked at the previous links), that the line has been capped by the DLM for some reason.

on TT
I appear to be banded in the 17.5 to 35 dlm profile.

thanks

Hi

How strange the link works for me not logged in. Although it did ask me to sign in clicked x and it downloaded straight away. The link has the QLN and Hlog

Pbparams
xdslcmd info --pbParams
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 24267 Kbps, Downstream rate = 70400 Kbps
Bearer: 0, Upstream rate = 20000 Kbps, Downstream rate = 34998 Kbps

Discovery Phase (Initial) Band Plan
US: (6,31) (882,1193) (1984,2770)
DS: (33,857) (1218,1959) (2795,4083)
Medley Phase (Final) Band Plan
US: (6,31) (882,1193) (1984,2770)
DS: (41,857) (1218,1959) (2795,4083)
VDSL Port Details Upstream Downstream
Attainable Net Data Rate: 24267 kbps 70400 kbps
Actual Aggregate Tx Power: 4.7 dBm 12.6 dBm
====================================================================================
VDSL Band Status U0 U1 U2 U3 U4 D1 D2 D3
Line Attenuation(dB): 0.6 22.9 36.3 N/A N/A 12.4 30.5 49.0
Signal Attenuation(dB): 0.6 22.7 36.2 N/A N/A 17.0 30.3 49.1
SNR Margin(dB): 7.1 6.7 6.8 N/A N/A 14.8 14.8 14.8
TX Power(dBm): -5.1 -23.0 4.2 N/A N/A 9.4 7.2 6.4
#

stats
xdslcmd info --stats
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 24267 Kbps, Downstream rate = 70400 Kbps
Bearer: 0, Upstream rate = 20000 Kbps, Downstream rate = 34998 Kbps

Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 14.8 6.8
Attn(dB): 17.8 0.0
Pwr(dBm): 12.6 4.7
VDSL2 framing
Bearer 0
MSGc: 36 150
B: 31 236
M: 1 1
T: 64 5
R: 10 16
S: 0.0290 0.3771
L: 11568 5410
D: 1123 1
I: 42 255
N: 42 255
Counters
Bearer 0
OHF: 24114464 64364
OHFErr: 18 11
RS: 669883948 3040757
RSCorr: 987229 155
RSUnCorr: 558 0

Bearer 0
HEC: 82 0
OCD: 5 0
LCD: 5 0
Total Cells: 243986502 0
Data Cells: 35427359 0
Drop Cells: 0
Bit Errors: 0 0

ES: 8 11
SES: 0 0
UAS: 386 386
AS: 67505

Bearer 0
INP: 3.50 0.00
INPRein: 0.00 0.00
delay: 8 0
PER: 2.79 6.15
OR: 120.03 202.87
AgR: 35117.67 20203.27

Bitswap: 43136/43136 49/50

Total time = 18 hours 51 min 31 sec
FEC: 987229 155
CRC: 18 11
ES: 8 11
SES: 0 0
UAS: 386 386
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 15 minutes time = 6 min 31 sec
FEC: 7632 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 15 minutes time = 15 min 0 sec
FEC: 18981 4
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 1 day time = 18 hours 51 min 31 sec
FEC: 987229 155
CRC: 18 11
ES: 8 11
SES: 0 0
UAS: 386 386
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 1 day time = 0 sec
FEC: 0 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Since Link time = 18 hours 45 min 3 sec
FEC: 987229 155
CRC: 18 11
ES: 8 11
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
#

Looks a bit that way.

So DLM has capped your downstream speed due to instability.

In reply to a post by sammyelrefee:

FTTC Range A (Clean)
64.4 45.3
18.5 11.9
FTTC Range B (Impacted)
54.8 30.6
18 7.9

I'm not sure about range from cab as I have been told conflicting info about which cab I'm even connected to! I'm sure I read on a forum somewhere that someone can dig it out!

thanks!

If you got that from the BT Wholesale checker, which it looks like, the line above the table should tell you the cabinet. That's assuming you are using the telephone number or full address options. The Postcode checker cannot be trusted.