General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: << 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | [19] | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | (show all)   Print Thread
Standard User deleted
(deleted) Thu 23-May-19 13:55:13
Print Post

Re: FTTPoD desktop quotes and final prices Part 4


[re: tommy45] [link to this post]
 
Hi

In reply to a post by tommy45:
Just got my desktop quote from cerberus after nearly 8 weeks waiting, and the quote from open reach isn't IMO at all credible @ Estimated Build Cost: £27,800.00 ex VAT and says that Number of premises passed for FTTP: 14
Openreach estimate that the distance to the fibre aggregation node serving your premises is 600 - 799m. The distance to the aggregation node ,
Which does not compute , and i can using google maps use the distance measuring tool and regardless of direction it is no where near 600mtrs on 14 properties passed in any direction


Unless you know the exact location of the aggregation node, and it can be anywhere and may be no where near your FTTC cabinet, so you can't really jump to any conclusions.

Also whilst the distance plays a factor, the costs are a more complicated equation where we don't know all the facts. If the aggregation node is the opposite direction of your telephone wire, they need to get the fibre from the aggregation node to somewhere it can join the same route as your telephone wire. It's a bit like how sometimes to join the motorway we end up driving back in the opposite direction to the nearest slip road to join it, adding distance.

The only option you have is if you think it's wrong is to pay the price for a full survey and be prepared to lose it.

Regards

Phil
Standard User tommy45
(knowledge is power) Thu 23-May-19 15:07:53
Print Post

Re: FTTPoD desktop quotes and final prices Part 4


[re: deleted] [link to this post]
 
But the number of properties they claim it would pass 14 , in any direction from my home (there are only 2 BTW) left or right, and my cabinet is 350mtrs up the road, if i turn left, and that passes more than 14 properties , if i turn right i could cross go straight ahead at the jnc or turn left or right, again it would exceed 14 properties they claim it would pass by a big margin, So their estimate is based on fiction a distance and figure plucked out of thin air,As for my nearest node I recall seeing what i looks like a ag node in a foodway chamber on the opposite side of the road , this was when they was installing FTTC cabs in the area it was definitely fibre had lots of those round discs where they feed the fibres into
Standard User deleted
(deleted) Thu 23-May-19 15:31:59
Print Post

Re: FTTPoD desktop quotes and final prices Part 4


[re: tommy45] [link to this post]
 
In reply to a post by tommy45:
As for my nearest node I recall seeing what i looks like a ag node in a foodway chamber on the opposite side of the road , this was when they was installing FTTC cabs in the area it was definitely fibre had lots of those round discs where they feed the fibres into

That could easily be a fibre splitter node. Unless someone from Openreach has already showed you, you cannot be sure where your nearest agg node is.

Edited by deleted (Thu 23-May-19 17:15:07)


Register (or login) on our website and you will not see this ad.

Standard User deleted
(deleted) Thu 23-May-19 16:15:23
Print Post

Re: FTTPoD desktop quotes and final prices Part 4


[re: tommy45] [link to this post]
 
Hi

In reply to a post by tommy45:
But the number of properties they claim it would pass 14 , in any direction from my home (there are only 2 BTW) left or right, and my cabinet is 350mtrs up the road, if i turn left, and that passes more than 14 properties , if i turn right i could cross go straight ahead at the jnc or turn left or right, again it would exceed 14 properties they claim it would pass by a big margin, So their estimate is based on fiction a distance and figure plucked out of thin air,As for my nearest node I recall seeing what i looks like a ag node in a foodway chamber on the opposite side of the road , this was when they was installing FTTC cabs in the area it was definitely fibre had lots of those round discs where they feed the fibres into


We can't second guess anything as we don't have enough information as consumers. The aggregation node is likely not where you think it is, so where it needs to run allows them to offer the connection to 14 properties based on the desktop quote. They don't necessarily enable a whole street, it may only be a section of the road that gets enabled (or passed), it all depends on what is happening above and/or below ground.

Properties passed also doesn't mean properties the cable physically passes by, it means additional properties that can be connected up at the same time without much additional work.

The desktop survey may be wrong and certainly is inaccurate, it's only an estimate after all. It doesn't matter what you think the distances are or routes involved, its what Openreach know and do that makes up the cost, and based on their records for the quick free estimate they've given you a figure that is on the high side.

The only way you can get an accurate figure is to pay for a survey and after that it may come down in price. They may come out and find their records were incorrect and you were right, and it drops considerably in price, they may not. No one here can know for sure.

If you really think it is wrong and can't be that expensive, then go for a full survey.

Regards

Phil

Edited by deleted (Thu 23-May-19 16:19:42)

Standard User Zarjaz
(eat-sleep-adslguide) Thu 23-May-19 16:38:57
Print Post

Re: FTTPoD desktop quotes and final prices Part 4


[re: Alucidnation] [link to this post]
 
In reply to a post by Alucidnation:
In our area, SSE have been installing new poles alongside the perfectly serviceable existing shared poles and moved their cables across.

*I suspect* that there are some changes with regards to joint user poles on the way shortly

... and posts like yours seem to bear this out too.

Standard User deleted
(deleted) Thu 23-May-19 16:47:58
Print Post

Re: FTTPoD desktop quotes and final prices Part 4


[re: deleted] [link to this post]
 
In reply to a post by donkay:
Hi all

After about 18 months of indecision and reading these various threads, I've taken the plunge on an FTTPoD survey from Cerberus @ £250+vat

All areas of Cardiff bar the north east are getting native FTTP and yes I live in the NE, see https://www.homeandbusiness.openreach.co.uk/fibre-fi...

After some email were exchanged between myself and Matt Sharpe (Infrastructure Solutions Executive Complaints) @ Openreach, he confirmed NE Cardiff wasn't in the pipeline anytime soon for FTTP.

I upgraded my current line to g.fast a few months ago but the reliability of speed is poor. I have had 2 OR engineers visit and they can't solve the issue. I am ment to get 200/20 but regularly get 60/20 and even 20/20!

Anyway, I'm looking forward to finding out the news on the actual build cost. My desktop survey was £8800. A quarter of this figure would be doable, hopeful I know but it's more the not knowing that has been irking me!

Will keep you all updated


UPDATE

OR surveyor just left. Lovely chap called Steve.

He reckons very straight forward install. 80m from agg node to pole, clear ducts all the way in a straight line.

He also thinks that the number of premises past are those served by the splitter node not those you share the pole with. Sounds wrong to me but that's what he's putting in his report. Approx 25 properties according to him, desktop quote said more like 6.

Waiting now for the full quote to come back, still hopeful of significant reduction in £8800 desktop quote.
Standard User candlerb
(committed) Thu 23-May-19 17:35:56
Print Post

Re: FTTPoD desktop quotes and final prices Part 4


[re: tommy45] [link to this post]
 
In reply to a post by tommy45:
But the number of properties they claim it would pass 14


No. "Properties passed" is a technical term, which means "properties which will be able to take FTTP service".

In order to provide service to your property, they will install a fibre distribution point (CBT = Connectorised Block Terminal), usually on a pole or in an underground chamber. They are saying that 14 properties will be served from this point, so 13 of your neighbours will also get the opportunity to take FTTP if they want it.

The fibre cable from the aggregation node to the CBT could go past a hundred other properties, but none of them will be able to take FTTP service (you can't just break into a fibre cable) - so they don't count as "properties passed".
Standard User deleted
(deleted) Thu 23-May-19 18:27:50
Print Post

Re: FTTPoD desktop quotes and final prices Part 4


[re: candlerb] [link to this post]
 
Hi Guys,

I took the gamble and asked for a survey, as recently our house builder has started to finish the rest of houses beside us, and these have been fibre enabled (<38 houses, and approx 100m away).


Desktop quote : £17.5k

Labour.............................£5,744.00
Contract Labour..............£0.00
Civils............................... £750.00
Stores............................. £3,582.00
Civils Stores.....................£0.00
Tree cutting.....................£0.00
BT Connection Charge £495.00

Deductions....................-£250.00(Survey charge already paid)
......................................-£900.00 (Premises Passed)
TOTAL : £9,421.00


So approx 50% reduction from the desktop survey.
The thing that I do not get is a Openreach engineer told me that where the AggNode was, and its only around 7meters away from my house, so I would have thought the quote would be much less.....but obviously not!!
Standard User Zarjaz
(eat-sleep-adslguide) Thu 23-May-19 18:44:41
Print Post

Re: FTTPoD desktop quotes and final prices Part 4


[re: deleted] [link to this post]
 
Maybe the person you spoke to, or possibly you, didn�t quite understand when speaking about the aggregation node ?

Standard User GonePostal
(member) Thu 23-May-19 18:52:27
Print Post

Re: FTTPoD desktop quotes and final prices Part 4


[re: Zarjaz] [link to this post]
 
In reply to a post by Zarjaz:
Maybe the person you spoke to, or possibly you, didn�t quite understand when speaking about the aggregation node ?


Or the person preparing the quote?
Pages in this thread: << 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | [19] | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | (show all)   Print Thread

Jump to