In reply to a post by j0hn83:

I've never come across a VDSL2 modem that lets me disable Vectoring, though their existence would not surprise me.

The Asus DSL-AC68U modem certainly has the option to disable vectoring:

https://community.bt.com/t5/image/serverpage/image-i...

In reply to a post by brookheather:

In reply to a post by j0hn83:

I've never come across a VDSL2 modem that lets me disable Vectoring, though their existence would not surprise me.

The Asus DSL-AC68U modem certainly has the option to disable vectoring:

https://community.bt.com/t5/image/serverpage/image-i...

No surprise.
It's the only device I've seen that also allows UPBO to be disabled which isn't supposed to be a configurable option either.
They really are the worst devices.

With G.INP automatically disabled on these devices I see no reason anyone would choose to use 1 on a Huawei cabinet at all, never mind with Vectoring disabled.

IIRC the HG612 allows it, and in its (Asbokid-hacked, but he said he altered no settings, just enabled telnet) Openreach configuration it was disabled. My Zyxel 1312 also allowed it to be disabled. I think that also defaulted to disabled in the latest firmware version I downloaded from Zyxel's website.

In reply to a post by RobertoS:

IIRC the HG612 allows it, and in its (Asbokid-hacked, but he said he altered no settings, just enabled telnet) Openreach configuration it was disabled. My Zyxel 1312 also allowed it to be disabled. I think that also defaulted to disabled in the latest firmware version I downloaded from Zyxel's website.

Can you point out where the Vectoring option is on the Zyxel? I can't find it in my WebUI.
Only has PhyR, SRA and bitswap.

I'd have to find the Zyxel first. I'm completely on mobile broadband now.

In reply to a post by adslmax:

In reply to a post by mikel543:

Vectoring was also rolled out to BDUK funded Huawei cabs. I happen to be connected to one and can confirm that my modem shows that vectoring is active.

Really? Any screenshot

Certainly: https://i.imgur.com/pDQpCwr.png

In reply to a post by RobertoS:

I'd have to find the Zyxel first. I'm completely on mobile broadband now.

I believe the option doesn't exist.

I think you may be confusing the xDSL Statistics page that shows "G.Vector: Disable" with a configurable option.

The "G.Vector: Disable" is simply the lines current Vectoring status.

I don't think the HG612 had a configurable Vectoring option either.
When initially released the HG612 firmware blob did not support Vectoring, but a later firmware added support.

Very different to being able to disable it.

Fair enough .