General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | [3] | (show all)   Print Thread
Standard User XGS_Is_On
(member) Fri 15-Jul-22 17:55:13
Print Post

Re: Virgin's FTTP


[re: acpsd775] [link to this post]
 
In reply to a post by acpsd775:
wish they would hurry up and start dishing out hub 5s with the 2.5GbE port but in the mean time i just Balance RR the hub 4 in modem mode with OPNSense, sometimes have to wonder if the extra electric cost is worth the extra speed mind lol

https://www.speedtest.net/result/c/e0f37a45-0a69-416...


Once you get the new Hub 4 firmware that'll put an end to using a LAG as you are. Make the most of it while you can.
Standard User acpsd775
(experienced) Fri 15-Jul-22 19:17:36
Print Post

Re: Virgin's FTTP


[re: XGS_Is_On] [link to this post]
 
In reply to a post by XGS_Is_On:
In reply to a post by acpsd775:
wish they would hurry up and start dishing out hub 5s with the 2.5GbE port but in the mean time i just Balance RR the hub 4 in modem mode with OPNSense, sometimes have to wonder if the extra electric cost is worth the extra speed mind lol

https://www.speedtest.net/result/c/e0f37a45-0a69-416...


Once you get the new Hub 4 firmware that'll put an end to using a LAG as you are. Make the most of it while you can.


well that sounds about right for VM supply you with something that's not fit for the job and then remove a work around weather official or not thats bee working at least for me well over a year, then just tell you well you can get all your speed if you use the hub in router mode, yet most people on that package would be customers wanting modem mode.

any idea where to see what firmware version im currently on cant seem to find anything obvious to see which version im on now im sure it used to show it under General Configuration

Edited by acpsd775 (Fri 15-Jul-22 19:23:22)

Standard User Mitchy_mitch
(experienced) Sun 24-Jul-22 12:29:48
Print Post

Re: Virgin's FTTP


[re: acpsd775] [link to this post]
 
Is there a guide showing how to enable this ?
edit - just found this:-
https://tech.msh100.uk/virgin/networking/2020/10/17/...

____________________________________________

Huawei B2268H/B222s-42 connected to ASUS RT-AC68U
http://www.thinkbroadband.com/speedtest/results.html...
http://www.speedtest.net/my-result/3141683986

Edited by Mitchy_mitch (Sun 24-Jul-22 12:49:15)


Register (or login) on our website and you will not see this ad.

Standard User acpsd775
(experienced) Sun 24-Jul-22 13:15:58
Print Post

Re: Virgin's FTTP


[re: Mitchy_mitch] [link to this post]
 
that's what i saw when they first posted it, but i do it via OPNSense, H4 in modem mode 2 cables from hub to my OPNSense box in a balance RR interface (2x intel Gbit ports) then my LAN is a intel 10Gbe port into a switch, when i first set it up i used PFsense and a intel 2.5Gbe card as at the time OPNsense didn't have support for the 2.5Gbe card.
Standard User Pheasant
(knowledge is power) Sun 24-Jul-22 16:59:59
Print Post

Re: Virgin's FTTP


[re: Mitchy_mitch] [link to this post]
 
Striping traffic across 2 VM hub ports...from the same good chap that brought you Better Internet Dashboard

https://bidb.uk
Pages in this thread: 1 | 2 | [3] | (show all)   Print Thread

Jump to