Forum Index | Search | Register (New User) | Login (Existing User) | Who's Online | FAQ | Main Site

Technical Discussion
  >> Hardware Issues Previous thread View all threads Next thread


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | [2] | (show all)   Print Thread
Standard User broadband66
(knowledge is power) Thu 30-Jul-20 11:59:19
Print Post

Re: Printer Feeds Paper At An Angle


[re: broadband66] [link to this post] 		 
Another update.

B200 error still present. Work around is to carryout the lid lift, carriage shuttles across and then closing lid will allow prints to take place.

Switch printer off and on again and error reappears.

Was Eclipse Home Option 1, VM 2Mb & O2 Standard
Now Utility Warehouse (up to 16mbps) via Talk Talk
Standard User zyborg47
(eat-sleep-adslguide) Thu 30-Jul-20 13:34:13
Print Post

Re: Printer Feeds Paper At An Angle


[re: broadband66] [link to this post] 		 
In reply to a post by broadband66:
Another update.

B200 error still present. Work around is to carryout the lid lift, carriage shuttles across and then closing lid will allow prints to take place.

Switch printer off and on again and error reappears.


Would it be better just to buy a new printer, how old is it anyway?

Adrian

Desktop machine Ryzen powered with windows 10 , reluctantly.

Plusnet FTTC
Standard User broadband66
(knowledge is power) Fri 31-Jul-20 11:23:15
Print Post

Re: Printer Feeds Paper At An Angle


[re: zyborg47] [link to this post] 		 
Very old. As I said earlier, about £150 for similar. Why buy when there might be a fix/workaround?

Was Eclipse Home Option 1, VM 2Mb & O2 Standard
Now Utility Warehouse (up to 16mbps) via Talk Talk


Register (or login) on our website and you will not see this ad.

Standard User zyborg47
(eat-sleep-adslguide) Fri 31-Jul-20 21:55:58
Print Post

Re: Printer Feeds Paper At An Angle


[re: broadband66] [link to this post] 		 
In reply to a post by broadband66:
Very old. As I said earlier, about £150 for similar. Why buy when there might be a fix/workaround?

I can understand where you are coming from, i tend to keep older stuff myself if I can, my toshiba Midi Hi-fi that I use in here for the computer is over 20 years old and still going strong. i know someone who still uses a dot matrix printer, that is a few years old, getting difficult to get the ribbons now.
i will stick with my LEd printer.

Adrian

Desktop machine Ryzen powered with windows 10 , reluctantly.

Plusnet FTTC
Pages in this thread: 1 | [2] | (show all)   Print Thread

Previous thread View all threads Next thread
Jump to