dmt tool

I like to use the dmt tool can some tell me what port to use on setup and if I should use annex a or annex b.

On skymax

adsl2

only syc at 8mb on netgrear dg834gt

Annex A

Port?

and thanks for the info.


Ok port is 23 but get error with dmt.

sky support is a nightmare anyway sync is only 8mb and should be 16mb and only getting a conection speed of 2mb and they will not put me though to tier 3 support have to wait for three days.Been promised phone back do tier 3 phone you back or is this a lie?

Edited by scifiman (Thu 06-Sep-07 02:16:00)

You need to switch netgear modems to debug mode before using the DMT tool

>Ok port is 23 but get error with dmt

You have to add the following as a Special Logon URL

/setup.cgi?todo=ping_test&c4_IPAddr=%26/bin/ash+-c+%27PATH%3D/bin%3A/sbin%3A/usr/bin%3A/usr/sbin%3B/usr/sbin/utelnetd+-d+-l+/bin/ash%27

Can you guys give me some info on how to do this please and thanks for your help.

Get error:can not identify modemtype.

where do I add that url in the IE or somewhere in dmt?

Edited by scifiman (Thu 06-Sep-07 11:50:06)

http://forum.zensupport.co.uk/28163/ShowThread.aspx

If it is the Sky router then I think this should work

linky


If it is a Netgear router with standard firmware http://192.168.0.1/setup.cgi?todo=debug this won't work on the sky firmware as it has been modified to ask for a login and the login command is broken.

Edited by AbandonShip (Thu 06-Sep-07 12:48:11)

>Get error:can not identify modemtype

You need dmt v8.06

>where do I add that url in the IE or somewhere in dmt?

In dmt, tick special logon
go to Special - Misc. options and enter the url in the Special Logon URL box

sky netgear dg834gt Firmware Version V1.02.28 .

Get to telnet though Command Prompt but can input user name but not password in command window.

and using windows Vista 32bit and have enable telnet though Programs and Features.

have added /setup.cgi?todo=ping_test&c4_IPAddr=%26/bin/ash+-c+%27PATH%3D/bin%3A/sbin%3A/usr/bin%3A/usr/sbin%3B/usr/sbin/utelnetd+-d+-l+/bin/ash%27

To special/misc.Options/special logon url still get error can not identify modemtype.

Edited by scifiman (Thu 06-Sep-07 13:07:30)