Technical Discussion
  >> Technical Issues


Register (or login) on our website and you will not see this ad.


These posts have been archived and can no longer be replied to or modified.
Pages in this thread: 1 | 2 | (show all)   Print Thread
Standard User zekanosmoke
(newbie) Sat 09-Jan-10 23:18:27
Print Post

adsl2 47db speed, help


[link to this post]
 
Hello! im 3 km from my exchange, before 21cn rollout i had 36db now its changed to 48db?? i dont know what caused the problem!before i had 3.5mbps then i said WTF?!?! and started to google about the problem and how i can improve my speed!I bought speedtouch 585v6 changed SNRm to 4db and now it syncs at day timee at 7.5 mbps and 6.5 at night! what an improvement! but my question is:there is a big drop in tones! how can i improve them?here are the stats of DMT!
Night Time
Day Time
Please Help
Standard User deleted
(deleted) Sat 09-Jan-10 23:49:37
Print Post

Re: adsl2 47db speed, help


[re: zekanosmoke] [link to this post]
 
You were on standard ADSL, you are now on ADSL2 and ADSL2+. Reported attenuations tend to be higher on ADSL2/+ than standard ADSL, although I thought an increase of 4dB was more typical.

Your daytime modulation (G.992.5) is ADSL2+ and your nighttime modulation (G.992.3) is ADSL2. I have no idea why.

What problem do you actually have?

If you want to see the best speeds you are likely to achieve plug your router into the test socket within the BT master socket. If they are better there is scope to improve your internal phone wiring.

See http://www.dslzoneuk.net/socket.php?type=html
Standard User zekanosmoke
(newbie) Sun 10-Jan-10 00:06:27
Print Post

Re: adsl2 47db speed, help


[re: deleted] [link to this post]
 
ive tried test socket, same speed! i was thinking, if tones increase , then my speed will increase! so i want to increase my tones! maybe there is something like an amplifier?


Register (or login) on our website and you will not see this ad.

Standard User deleted
(deleted) Sun 10-Jan-10 00:59:05
Print Post

Re: adsl2 47db speed, help


[re: zekanosmoke] [link to this post]
 
ADSL dosn't work like that. You can't by something to amplify the tones that you are missing.

The speed you are getting, if the 50db attenuation is correct, is very good. I know people with the same attenuation getting much much less.

Matt
Standard User zekanosmoke
(newbie) Sun 10-Jan-10 01:55:33
Print Post

Re: adsl2 47db speed, help


[re: deleted] [link to this post]
 
ok then, if i change the wire to my house? will it makes any difference? because some people tells that they have second line and it works better than their old one??
Standard User deleted
(deleted) Sun 10-Jan-10 01:57:25
Print Post

Re: adsl2 47db speed, help


[re: zekanosmoke] [link to this post]
 
It *may* do - as every line is different but there is no guarantee it will and you may then be out of pocket to the tune of over £100 if you get BT to do that.

Matt
Standard User zekanosmoke
(newbie) Sun 10-Jan-10 02:11:55
Print Post

Re: adsl2 47db speed, help


[re: deleted] [link to this post]
 
ok i'll think about it, and if i move to LLU will it make any difference aswell?
Standard User deleted
(deleted) Sun 10-Jan-10 02:13:15
Print Post

Re: adsl2 47db speed, help


[re: zekanosmoke] [link to this post]
 
Probably not. Your line to the exchange would be exactly the same.

Matt
Standard User zekanosmoke
(newbie) Sun 10-Jan-10 02:16:06
Print Post

Re: adsl2 47db speed, help


[re: deleted] [link to this post]
 
thanks for fast reply!yestrday i seen a BT engineer was doing someting at green box, and my signal dropped a lot! can it be that he messed up some wires? lol
Standard User deleted
(deleted) Sun 10-Jan-10 02:17:40
Print Post

Re: adsl2 47db speed, help


[re: zekanosmoke] [link to this post]
 
In reply to a post by zekanosmoke:
my signal dropped a lot


What do you exactly mean by that? Do you have any before and after graphs/stats?

It is possible you might have a dodgy connection in the cab but without seeing the stats - too hard to say.

Matt
Pages in this thread: 1 | 2 | (show all)   Print Thread

Jump to