The modem WAN IP is dynamic and changes at random by the ISP. Inwardly, the modem is 192.168.1.1 and is providing DHCP server and providing LAN addresses from pool 192.168.2.100 to 192.168.2.150. But when I put the modem into bridged mode, most if not all of the web gui was lost so i think the router is providing the DHCP server??
The router LAN IP is static at 192.168.2.1. The WAN port is connected via cat5e to port 1 on the modem.
All works fine, but i cannot access the modem config web page (i.e. http://192.168.1.1) UNLESS I disconnect the router and connect my laptop to port 2 of the modem with my ethernet cable.
Can somone please explain what's going on here, and if can be resolved such that LAN clients can access the modem config page "normally"
Edited by deleted (Mon 05-Feb-18 15:13:22)



Print Thread
