Help with DMT - Connection problem?

I have a belkin router, I type the IP in the ip-ass box, but my router doesn't have a user, but DMT requires me to use one.

What does anyone else use to connect to a belkin router through DMT?

Are you using a Belkin 7633? First check if the telnet interface is working. If it isn't then I think you need to change the firmware. If it is then the user name is admin.

Using Belkin F5D7633

what is the ip address i use - user and pass

The IP address is the same as the IP address you connect to when using the router's web interface, the user is admin, and the password is the same the router's web interface. As I said though, do check whether you can get a telnet connection to the IP address first. There was a batch of 7633 routers sold (reportedly in PCWorld) that had the telnet interface disabled. As the DMT tool relies on the telnet interface then this batch of routers don't work with the tool.

this is what it says when i try and connect

Error: can not identify modemtype. DMT version 0.99 for speedstream_4100/4200/5100/5200, Teledat_302/430

telnet? (Just run the command 'telnet <IP address>', no quotes or brackets.)

C:\Users\S****>telnet 192*****
'telnet' is not recognized as an internal or external command,
operable program or batch file.

thats what it says...

thought it was quite easy to log into this DMT

Are you using the correct (8.05) version of DMT?

Eric

no version 9

thats where the problem was, thanks mate working now