Line Problems

Hi there,

I'm having a few problems with my line BT Line on Entanet.

Basically since the beginning of the week i've lost about 1-1.5Mb on my sync. I've looked at DMT and it seems i'm getting a large influx of noise from 500khz + which was not there before. I've plugged into the test socket (use a filtered faceplate anyway) and it's still there.

The actual throughput is awful. Latency is ok. Download speeds are < 1Mb. I'm currently sync'd at 3.7Mb. Upload speeds are normal.

Any idea's what could be up?

I've included a DMT graph of before and after the noise.

Before : http://img519.imageshack.us/my.php?image=testsockoi9.png

After : http://img337.imageshack.us/my.php?image=bbshockinrf4.jpg

Both screen dumps from test scoket. In second photo sync is 5.318Mb, Att 48, SNR 2.0.

Thanks.

Just plugged my 2wire 2700 in and i'm getting the same problems.

Deff a line issue.

Whats this all about?

Training History

Downstream

Time Line Rate Max1 Max2 Max3 Mgn1 Mgn2 Attn Pwr CRCs
18:06:34 BST 1 5696 5700 3632 3812 6.0 -3.0 47.7 19.5 4553

18:16:01 BST 1 3232 3248 4744 4952 6.1 7.0 47.7 19.6 474

Edited by wolvesmad (Tue 13-May-08 18:24:22)