Full FTTP go live

First FTTP goes live for Cuckoo Oak showing full fibre FTTP 1000/220 for Cabinet 7 & 9

My parents will getting FTTP soon.

https://ibb.co/fn042g2 for cabinet 9
https://ibb.co/ZgdVHVJ for cabinet 7

Edited by adslmax (Tue 29-Sep-20 18:29:30)

But you don’t want it .......

Pretty very poor upload from BT. Should be both download and upload same speed. It's 21st century not 19th century!

In reply to a post by Zarjaz:

But you don’t want it .......

Pretty very poor upload from BT. Should be both download and upload same speed. It's 21st century not 19th century!

Yes I do want FTTP but happy with 80/80 FTTP rather than FTTC 80/20

FTTP is not cabinet based so unlikely it is going live for specific cabinets it more likely just happens that some of the people getting it on are on those cabinets.

While correct there is a pattern to the roll-outs in that areas of ducting/poles often go live in batches and these tend to follow old cabinet areas.

A side effect of reusing existing duct and poles and that some cabinets serve obviously defined areas

If 80/80 is what you want, then buy 900/110 and just throttle the 900 down to 110.

I will not buy 900/110. The standard one FTTP 80/20 will be more than enough. FTTP are lots better than FTTC (EVIL DLM)

I was going to suggest this also. Option of 80/80 is possible with being on the higher package and throttling it to the speeds required.

Hope the "Evil DLM" works if you ever need it in the event of a line fault and not cutting your service off completely or would you be satisfied with complete loss of service?

There is no DLM with FTTP

Was referring to the EVIL DLM on adslmax's FTTC, Sorry for the confusion

On FTTP myself 50/10