BT Engineer called today, I popped home. Really friendly guy with plenty of experience and knowledge. Told me which cab I was connected to (I knew it was one of two) and the routing from that to the main exchange wasn�t very good.
He identified that there was noise on the line, used his computer to carry out a test, it couldn�t find a signal the first time but the second time he could but was still showing 63dB still 2dB higher than what it was previously). He installed a new BT master socket (BT Branded) and provided me with another filtered faceplate. Double checked it again still at 63dB. So only syncing now at 2500kbps with SNR to 6dB. I only will have to have this for a week, as I go over to fibre next Thursday.
He said he was going to look in the cab after my visit to try and run me on a pair with the least interference, but said with how close I am to the cab I should see very near, if not full speeds of 40/10 when I go over to fibre.
All in all a very pleasant experience, line fault should now be sorted, I�ll see when I get home from work whether it has been improved with a new line between me and the cabinet, but not to worry if not, as only a week until it gets upgraded anyway.
Edited by deleted (Thu 18-Oct-12 16:31:34)



Pages in this thread:
Print Thread
deleted